Blade is a very important and essential part of the wood working. It plays a vital role in molding the appearance of the work and greatly influences the end result of your product.
Each blade has its own specialty and purpose thus we will discuss about the best jigsaw blade for wood. Major part of the performance of the power tool depends on the blade.
If you want to attain neat, aligned and smooth cuts with minimum errors, then you must never overlook the subject of jigsaw blades.
The jigsaw you own is only as good as the blade. Just like any other power tool, a jigsaw also needs a well functioning, sharp and efficient blade.
Any wood worker who has been working for large heavy duty wood projects or a beginner with DIY projects knows that at some point during their work they must require a jigsaw.
Therefore, we must not ignore the fact that this saw is equally important. However, the good part about the jigsaw blades is that, they can pretty much tackle any task.
They are straightforward, tough and easy to operate. These blades are typically made to perform straight aligned cut that even a beginner can operate the blade easily.
But one must know the right blade to pick before starting the cutting process. To make this process easier and less time consuming for you, we have gathered and provided 10 best jigsaw blades for wood.
The below information includes the best features, specifications and best feature of each model. Make sure to read the article till the bottom.
A Detailed Review Of Best Jigsaw Blades For Wood Cutting & Metal Cutting
Here we are going to provide you with the list of the top 10 best jigsaw blades for wood , so that the process of choosing the right jigsaw blade becomes further easy.
You must consider all the features and specifications before you purchase, in order to buy the right product, which also fulfills all your cutting requirements.
1. BOSCH T5002
This top rated T5002 T-shank blade set offers an assortment of blades that add up to affordability, high performance and efficiency for your saw application requirements.
This 10 piece blade set is highly durable and versatile and fits different woodworking needs. The blade set consists of T118A, T118B, T101B, T144D, and T119BO blades.
Out of these sets of blades, two pairs of large teeth blades ideal for straight cutting, four blades to cut metal and the last set has a wave like set of teeth that are ideal for cutting small clean, finished cuts.
Moreover, the two blades in the set are designed with high TPC, which is great for performing curved cuts.
These blade types have a T-shaped shank which is compatible with almost any jigsaw in the market.
However, the sizes are ⅛ inch, 3/16 inch, ¼ inch and 5/16 inch. Aside from cutting wood and metal from these blades,
you can also consider cutting similar materials like laminate, plastic or acrylic. As the blades are break resistant and made up of high carbon steel, there are low chances of them wearing out very rapidly.
The Bosch T5002 multipurpose blades further eliminates the need to set the screw in a mounting hole to reduce breakage.
Regardless of any tough material you are cutting, these blades do not cause splintering. However, the blade might lose their cutting edge after some time of using them on metals and other hard materials.
2. DEWALT DW3742C
These blades are a good value of money and for a very affordable price you would receive 7 different blades.
Along with that, you will have another for backup in case the blade breaks, bends or deviates. The blade package includes 14 pieces of 6, 10, 12, 18 and 32 TPI blades and storage case.
Out of these 14 pieces, 4 of these blades are for wood cutting purposes, one for laminate and the remaining for metal cutting purposes.
This is incredible versatility as it covers a wide range of material for cutting. The blades that manufactured to cut metal and metal sheets are made of bimetal, while the other blades are made up of High carbon steel.
These blades will leave a clean smooth finish on every cut even they are used in a cheap jigsaw. The blades with 6TPI and 10TPI are 4 inches long, and the 18TPI and 32TPI blades are 3 inches long.
This ensures you receive a precise finish with excellence. The DEWALT DW3742C blades have a T-shank design that enables them to fit into almost all DEWALT and Bosch manufactured jigsaws.
The blades have a clear indication on them, regarding the type of material they are meant for, type of cuts they will produce, and also the materials they are made up of.
However, a lot of wood workers and carpenters claim that these blades tend to deviate and bend quite easily.
3. WORKPRO W124142A
The blades by WORKPRO are immensely sharp, tough and they keep their edges sharp even after lots of hard wood, plastic and metal cutting.
The W124142A blades are ideal for both DIY and professional tasks.
The set of 25 pieces contains CRV blades with the improved cleanliness for general-purpose cutting of wood, laminates, and plywood, HSS blades for hardwoods, metal, or reinforced plastic and BIM blades for heavy-duty work on metal and hardwoods.
These blades do not bend, deviate or break under high pressure and heavy duty load. The blades feature varying TPI to cut materials of different thicknesses.
The WORKPRO 25 Piece Set includes five each T118A, T144D, T101B, three each T123X, T101AO, and two each T127D, T345XF jig saw blades with a storage case for convenience of organized access to the blades.
The case is made up of hard plastic to keep the blades safe and free from environmental rusting. Each blade present in the set is carefully labeled with its purpose of cutting.
However, these blades work slower on metal material and the set does not include any blades of TPI of 32 and 36 for cutting hard and thick materials.
4. BOSCH T101AO
The T-shank design of the blades makes it compatible with every jigsaw and reduces the set screw mounting hole for longevity and increased durability.
The five points of contact helps the Bosch T101AO3 blades cut with ultimate stability and precision.
These blades can easily cut through thick or thin wood and other variety of wood such as plywood or laminates.
The set of the blades include a blade of the T144DP model for accurate, precise cuts, a T144DP for clean cuts, T101AO for extra clean cuts and a basic blade.
Furthermore, the set includes blade with a reverse tooth, which is considered ideal for making cuts with less debris build up.
The blades have 20 TPI pointed tooth profile and narrow blade body, which is made for curved cutting, scrolling and clean cuts with less amount of splintering.
These 20 TPI blades are 3 inches long making them useful for cutting laminated substrates, MDF, hard and soft woods, and plywood.
These blades are suitable for demanding applications and can be used on plastic as well. However, the only con of these blades could be that there are only 5 pieces of blades per pack.
5. Cozzmts 0647726952772
The set of these high efficiency blades include 5 pieces of T118A (3 inch, 21TPI) for cutting of thin metal sheets, 5 pieces of T118B (3 inch, 12TPI) for cutting of medium metal sheets, 5 pcs of T101AO (3 inch, 21TPI) scroll blade clean for wood, 5 pieces of T101B (4 inch 10TPI).
The T-shank of the jigsaw blades make it compatible with almost all the current jigsaws including Bosch , DEWALT , BLACK DECKER , TACKLIFE , Makita , SKIL , Rockwell Blade Runner X2 jig saws.
The Cozzmts blades are a perfect choice and preference if you have a tight budget as these blades provide high performance with affordability.
This jigsaw blade kit has an amazing build quality for intended types of cuts. The blades are tougher and stronger than most of the other blades out there.
These blades are made up of High Carbon Steel with SK5 high carbon steel, which is far better than CRV. This helps in achieving maximum finish and accuracy with extended life in wood material.
You can easily go for straight, clean and speed cuts. Furthermore, these blades are made with high speed steel along with genuine high quality production.
The Cozzmts blades are made to provide superior wear tolerance and extended life to the blades so that they do not require frequent sharpening.
However, Proper lubricant is recommended when cutting metal and Some T-shanks may fit loosely.
6. BOSCH T102BF
The ground and taper back teeth of the T102BF blades make smooth cuts rapidly due to its bi-metal construction.
This set includes 3 pieces of 2-5/8 inch blades that have a T-shaped shank, which provides prolonged durability.
This blade by Bosch pretty much clears all the problems that you might face while cutting a plexiglass or acrylic as these materials are soft.
The blade does not overheat and build up the debris thus preventing the material from damages and scratches.
This result in further smooth, clean and straight edged finished cuts. The blades provided in this set are color marked thus eliminating the struggle to find the purpose of each blade.
The blade does not leave any residue later for cleaning as your workshop is likely to stay clean after the use.
These blades are under budget and a great choice for people who prefer inexpensive blades. The blades are Bi-metal with 13 TPI for clean cuts on plexiglass.
The Bosch T102BF blades are good for smooth cuts with rigid foam insulation and can be used on ceramic tiles, ABS plywood and MDO.
However, the blade somewhat is delicate and break while cutting harder and tougher materials as it is meant to cut clean plexiglass.
The blade further can also deviate and deflect to the side thus stay careful while you cut through it.
7. BLACK+DECKER 75-626
This set of blades features the best scrolling blades for making excellent, precise cuts into the wood whether hardwood or softwood.
The pack also has blades that can cut through aluminum and all the non-ferrous metals. These blades have 6 TPI and sharp pointed teeth that are great for smooth cuts on the hardwood.
The set also has such blades that have many tiny teeth for narrow cuts needed for materials like laminates.
The Black Decker 75-626 jigsaw blade set includes multiple blades for different applications with a great build quality and TPI ranging from 6-24.
However, the blade have a U-shaped shank thus must keep in mind that it can differentiate the cutting style. Collectively, some blades are ideal for straight cuts and others for curved cuts.
All blades are labeled with their TPI numbers, their purpose and compatible material so that there is less chances to go wrong.
Overall, the blades can easily cut through hardwoods, plywood, plastic, aluminum, non-ferrous metal and metal.
Some of the wood cutting blades are general purpose and tackle a wide range of wood projects. However, the blades might deviate if you apply extended pressure and saw too fast.
This set might also include a few blades that are too short to cut through materials bigger than 1 ½ inches.
8. BOSCH T30C
These blades are of high flexibility and immensely convenient to use. There are different blades in this set and each blade has its own purpose and specialty.
The kit includes T-shank blades for rapid, smooth and clean cuts on wood, plastics, and metals. The 30 blades present in this kit come in group of four for different purpose and for you to stock up for later use.
These groups of four blades are 4 T119BO basic scroll blades for wood, 4 T144D speed blades for wood, 4 T101B clean blades for wood, 4 T101D clean for wood, 4 T101BF clean blades for hardwood, 4 T118A basic for metal, 4 T118B basic for metal and 2 T308B X-tra Clean for wood.
The above mentioned wide selection of blades for metals and plastics provide versatility and durability and excellence in the cuts.
Out of these so many blades, each one of them can be used to cut different material for different projects.
The extra-clean blades present in the set are made to cut slowly and provide you with a smooth surface. Such blades require little clean-up, ultimately saving a lot of time.
The kit includes a durable and long lasting storage case for keeping the blades clean and safe.
9. TAROSE T101AO
With 20 TPI, the blade can cut through toughest thick or thin material including laminates.
The T-shank of the blade makes it compatible with almost every jigsaw including Porter-cable jigsaws and others by the well-known brands.
The blade set includes 30 pieces including blades of the T144DP model for precise cuts, T144DP for clean cuts, T101AO for clean cuts and a basic blade.
The set also has a pair of blades included with a reverse tooth, which is specially design to cut as clean as possible with minimal waste and debris build up.
These blades are long lasting and oftentimes used for heavy duty projects. Even under pressure, these blades never fail to deliver sharp edged and smooth cuts.
They are ideal for demanding wood cutting projects and fulfill all the needs of wood crafting and it can be also used to cut through various plastics.
The size of the blades in this set is between 3 inches to 4 inches, which makes them ideal for clean, accurate and basic cutting tasks.
The high efficient blades are made up with thick gauge high carbon steel for clean cuts in the wood. The blades are wear tolerant and have a prolonged life than most the other blades.
These high quality blades stand out with superior abilities. The blades have a 3-1/4 inch overall length and 2-1/4 inch length of knife edge for straight, fine cuts on wood.
However, the blades meant for curve cuts are not included in this set.
10. Gunpla OT429
These are ideal sized T-shank blades that can fit into every other jig saw and guarantees an accident free application.
The GUNPLA blade set contains 5 blades of each type of T244D, T118A, and T144D models which are specially designed to cut aluminum, steel sheet, and other ferrous to non-ferrous metal sheets whether thick or thin.
The blades are well-maintained and deliver ultimate working efficiency for fast cuts, curved cuts, and plunge cuts in hard and soft woods.
These blades can further cut OSB and plywood. The teeth of the blades have a unique shape and design that is crafted to drastically maximize the cutting productivity.
These blades are a productive resource to carry out various types of cutting tasks on thin metal, wood and aluminum sheets.
The GUNPLA blades are made up of durable material that is perfect for cutting ¼ inch to 2-3/8 inch thick materials with their 4 inches 5-6 TPI blades only.
Moreover, the blades do not accumulate debris and do not overheat and burn, resulting in causing less damage to the material that has to be cut for a variety of cutting shapes.
Therefore, these blades are also ideal for people who usually DIY and for hobbyists as well as professional wood workers.
However, in some cases, there is no storage case included and there may be poor sharpness issues with the blades at first.
How To Choose The Best Jigsaw Blades?
Choosing power tools and their blades is one of the toughest tasks a wood worker might encounter as there are numerous options available in the market from high end to low end and from high functionality to high portability.
This is why, here we have provided all the related information that a person may need before going to buy the best jigsaw blade according to the usage.
You must consider these important major characteristics which a quality jigsaw blade must have.
Material To Cut And Blade Material Type
Before you buy the blade, you must figure out and know your needs. If you are someone who typically works with wood only, you must consider a blade of carbon steel.
These carbon steel jigsaw blades are not expensive and they can cut across both hardwood and softwood.
This is why choosing the right material of the blade according to the material you cut is extremely crucial.
The material of blade truly depends on material to cut. Here is the further elaboration with respect to the material for a better idea:
For most projects involving wood, you must have a blade that is made up of carbon steel. You can also go for many other matching materials that are available in the market and are cheaper too.
These blades must be durable and flexible as they are supposed to perform cuts on both hard wood and soft wood.
Some of the most famous brands that manufacture carbon steel jigsaw blades are DEWALT, Bosch and Black & Decker.
For Plastic & Hard Metals
In order to cut tough and harder materials, you should look for a jigsaw blade that is made up of even durable materials than the carbon steel.
The blades must be made up of something like tungsten carbide and other similar ones. A tungsten carbide blade will not deviate or bend easily while cutting tough materials.
Teeth Per Inch
Teeth per Inch basically determine the cutting speed, performance and ability of the saw thus it is very important to consider the tooth count of the jigsaw blade.
It is not a smart decision to overlook the tooth count of the blade as the end results of your projects depends on the blade.
However, teeth per inch on a blade must be different for material to the material. Again, for you to have a better idea, we have provided you the related information below:
Any jigsaw blade that has typically around 6 to 8 teeth per inch is ideal for cutting wood. This tooth count is more than enough to achieve accurate excellence.
However, a jigsaw blade with 10 teeth per inch is also used due to its better performance but these blades tend to work through the material much slower.
You can work with a blade that has even more teeth but keep in mind that those blades would be less significant and comparatively slower. Therefore, a blade with 4 to 6 teeth works just fine.
Plastic is a very complicated material ad requires extra care as it is a softer material and it must have to be cut with ultimate accuracy and precision.
Such precision is attained only if you work your way slowly through the plastic. For slower cutting, you will need a blade with more than 10 teeth probably 16 to 18 teeth per inch. This is an ideal range of teeth to cut through plastic.
For Hard Metals
Despite of jigsaw being versatile power tool with high efficiency, there is still some risk in cutting hard materials through it.
This is why harder materials are not recommended to be cut with a jigsaw. However, due to some reason you are about to cut a hard metal or material through a jigsaw, then you must have a blade at least 20 teeth or more.
It is recommended to select a blade with teeth number for cutting hard metals that is 24. This somewhat will provide you with better cutting results.
For jigsaw blades typically there are two types of shanks that mare made available for the wood workers.
Those two types are U shaped or universal shank and T shaped shank. Usually older models of jigsaws support U shaped shank and these are not what their name suggests.
These shanks are not compatible with all types of jigsaws. On the other hand, the T shaped shank is found in all the new and recent models of jigsaw.
They have now become the most common. Also, T shaped shanks are compatible with the most number of jigsaws.
What Are The Different Types Of Jigsaw Blades?
Just like the blades of any other power tool, a jigsaw has several types of blades as well. Each of these blades has their own specification, specialty and feature.
They serve different purposes and ideal for working on various materials. However, most jigsaws use a standard blade design to carry out most of the intended cuts.
But for perform several different cuts on unique materials you must swap the standard blade design with the special one. Some of the different types of jigsaw blades are:
Reverse Tooth Blades
Reverse tooth blades have such teeth that point downwards rather than upwards. This is unlike most of the standard blade designs.
This deliberately enables the blade to cuts on the down stroke than the up stroke, allowing you cut through such materials that are prone to splinter while working.
You can easily cut laminate floorboard or countertop with this type of the blade without causing excessive damage to the blade.
Plunge Cut Blades
A plunge cut blade has such a design that has a sharp tip at the end. These kinds of blades are ideal for a carpenter who intends to pierce through the materials.
The plunge cut blades are manufactured to produce narrow cuttings than a usual cut. It further provides extended flexibility to perform curved cuts as the blade rarely bends or breaks.
The blade provides cleaned, accurate and controlled cuts. However, it works better with delicate and softer materials such as plasterboard and other softwood materials.
Flush cutting blades are specialty and advanced options for cutting an extended surface as the shoe of the jigsaw often extends beyond the blade.
When this happens, it is nearly impossible to cut a flush surface with a standard design blade. This innovative type of jigsaw blade will enable a vertical surface cut conveniently.
This blade is meant to produce refined, knife-like précised and satisfactory cuts. It is an ideal option for attaining an ultra-clean slice through different materials.
Types Of Blade And Materials
Each blade is made up of different material that truly depends on what type of material they are supposed to cut and what is their main purpose to be manufactured.
The type and material of blade you choose depends on your requirements. However, the most common and durable materials that are used to make the blades of the jigsaws are tungsten, carbide, carbon steel, steel, and bi-metals.
From the above given material you can choose any based on your requirement, durability and budget. The budget is an important factor to consider as it might put some limitations on your choices.
High Carbon Steel
High carbon steel blades are made for cutting wood specially curved designs on the wood whether hard wood or soft wood. These blades are much more flexible and inexpensive.
Tungsten Carbide Blades
Tungsten carbide blades are made for cutting fiberglass, ceramics and stainless steel. These are high durable and most versatile jigsaw blades.
The reason behind this is that, these tungsten carbide blades are high resistance of heat and temperature.
Bi-metal blades are a blend of high speed steel and carbon. These blades are made for cutting metal and hardwood.
This means they are tougher blades and do not deviate or break easily. These flexible blades have higher wear resistance than high carbon steel blades and are made to last long.
You must buy a blade that is durable and versatile. This is because you cannot spend a lot of money buying blades all the time. This is a huge investment.
If you buy a durable, high quality blade, there are more chances that it will not wear out much quicker thus you must check the durability of the blade before buying it.
To check the durability of a jigsaw blade, check for the material it is made of and the number of teeth per inch with respect to the requirements of your project.
A jigsaw is a power tool that is commonly used by the carpenters around the globe.
No matter if the carpenter is professional, a beginner or an intermediate at some point during the wood working process he must feel the need to use a jigsaw.
However, a jigsaw is only useful when you have the right compatible blade with it. Without a correct blade, you cannot expect your jigsaw to produce perfect, accurate results.
For this purpose, we have gathered all the necessary information that you must know regarding the best jigsaw blades for wood including their review, factors to consider, building materials and durability. Make sure to read it thoroughly.