When cutting with a radial-arm saw, table saw, chop saw, or sliding compound miter saw, be sure that the blade is appropriate for the instrument and the cut.
A miter saw blade with 60 teeth and an 80-tooth miter saw blade are not the same thing. There is no scarcity of high-quality saw blades available on the market nowadays.
It is possible that even a seasoned carpenter will be perplexed by the huge array of blades available today.
Circular blades are the most often seen form of blade. In addition, 60 and 80-teeth woodworking blades are available for purchase.
Generally speaking, a 60-tooth blade is ideal for cutting large areas, but an 80-tooth blade is best for cutting accuracy.
If you’re trying to decide between a 60-tooth and an 80-tooth miter saw blade, I recommend that you read this post first.
This is due to the fact that I thoroughly addressed the issue by contrasting the two types of blades and their applications.
The following is the difference between a 60-tooth miter saw blade and an 80-tooth miter saw blade:
The most significant difference between a 60-tooth miter saw blade and an 80-tooth miter saw blade is the number of teeth per inch of blade thickness.
The greater the number of teeth, the more forceful and precise the cut on your material will be.
Wood and plastic cutting blades with 60 teeth are suitable for cutting materials such as wood and plastic.
Their versatility allows them to handle a wide range of applications without the need for constant blade replacement, but they do not provide the precise cuts that an 80-tooth blade does.
Increased tooth density produces a smoother cut, whereas decreased tooth density produces a faster removal of material.
Cross-cutting blades with a high tooth count are commonly used in cross-cutting applications. A miter saw blade with 60 teeth removes less material per tooth than a blade with fewer teeth.
Because the blade enters the stock, it produces a greater number of individual cuts than a ripping blade.
Therefore, the pace at which the food is consumed must be reduced. As a result, the texture of the sliced surface is more consistent, and the edges are smoother as a result.
If you’re going to be doing a lot of finishing work, such as connecting crown molding, you’ll want to make a much more precise cut.
It requires the addition of teeth. Blades for crosscutting saws are cut at an angle across the width of the blade.
When cutting across the grain, blades with a high tooth count function exceptionally well. In order to perform perfect miter cuts, a blade with at least 80 teeth must be used.
Heavy-duty tasks requiring big pieces of hardwood or metal are not recommended for these blades due to the potential of misalignment when sufficient pressure is applied to the blades.
As well as the diameters and number of teeth, which should be assessed (they range between 60 and 80), additional factors such as quality, durability, and so forth should be considered.
The fact that this blade is best suited for soft materials means that it is excellent for cutting delicate metals and plastics.
This product is not appropriate for applications needing a significant amount of force or pressure, such as hardwoods.
60 teeth miter saw blades, on the other hand, are ideal for use on thinner parts because they create smoother cuts that are free of splinters.
When used in conjunction with adequate lubrication, this blade will assist you in working more efficiently while decreasing your risk of injury from sharp edges that fall from above.
What exactly is the stumbling block? The inability to cut through thick material quickly due to a lack of space between the teeth results in more effort and uneven quality work due to the tooth’s inability to handle heavier materials 60 vs. 80-tooth miter saw blade
60 vs. 80 Tooth Miter Saw blade: How many teeth is best?
80-tooth miter saw blades, on the other hand, are capable of cutting through wood and metal with similar efficiency–even when the wood or metal is thicker than 60 teeth! I’m not sure what this means exactly
There is no need to worry about replacing the blade in the middle of a project because of the blade’s flexibility to a variety of thicknesses (although be aware that these types of blades are more susceptible to breaking).
Aside from that, the greater tooth count of an 80-tooth blade allows for a more precise cut.
This reduces the likelihood of making a mistake, which is essential when working with expensive materials such as hardwoods!
Additionally, it is gentler on your blade, reducing the likelihood of damage and allowing you to save money on blade replacement costs.
It is possible that an 80-tooth miter saw blade will be required if you want to work with wood that is heavier or more difficult to cut with a 60-tooth miter saw blade.
When selecting the ideal miter saw blade for your application, there are a few more considerations to keep in mind.
These factors are relevant whether you are working on picture framing or composite decking materials.
What Is The Optimal Number Of Teeth For A Miter Saw Blade?
Because of this, you are now prepared to cut a substrate using a miter saw blade.
You should be aware of the blade diameter that is compatible with your saw as well as the type of blade that will be necessary to cut the material you are cutting.
Nevertheless, how can you calculate the optimal amount of teeth for your blade?
Calculate the width of the material to be cut in order to determine the tooth count that is appropriate for a particular blade design.
Teeth on the material to be cut are required to have a minimum of two teeth and a maximum of four teeth. It’s a fantastic place to get started.
In order to get started, let’s take a look at how to determine the tooth count on a miter saw blade before you start cutting.
The pace, kind, and finish of the cut are all influenced by the teeth of the saw blade on the job. Blades with fewer teeth cut more rapidly, but blades with more teeth provide a smoother finished product.
Gullets can be found in the spaces between the teeth. They aid in the removal of chips from workpieces.
The presence of expansion holes along the rim aids in the prevention of the blade from bending during operation.
Besides that, they reduce resonation, which results in a more exact cut.
What Is The Best Miter Saw Blade To Use for Your Project?
The teeth, not the disc, are responsible for completing the blade cut. Consequently, the saw blade you choose has the most influence on how well the material cuts.
It is essential to choose the proper type of tooth for both personal safety and the quality of the cut.
Starting with the fact that a saw blade with a greater tooth count will produce a more accurate and polished cut, Because of the increased tooth count and blade thickness, it is particularly well suited for making precise, accurate cuts in laminates and parquet flooring.
Teeth made of tungsten carbide are highly durable and can be reground due to the fact that they are made of this material.
It is possible to use them for a longer amount of time due to the fact that they are quite durable.
If you’re seeking the best miter saw blade, you should also take the form of the blade’s teeth into consideration.
The form of your teeth has an impact on the quality of the cut you get. In terms of contoured teeth, the alternative top bevel is a standout example of this.
Unlike the tooth behind it, the tooth in front of it has a blade, while the tooth behind it doesn’t.
These teeth are very useful for cutting swiftly through solid wood, especially when cutting along or across the grain of the board.
Additionally, the following characteristics should be taken into consideration while selecting the appropriate blade for your miter saw:
-
Size
Prior to diving more into the technical aspects of saw blade selection, it is important to consider the size of the blade being considered.
Check your device or the instructions that came with it for any problems. It is necessary to provide information about the bore size.
This guarantees that the miter saw blade you purchase is compatible with the miter saw you want to use with your purchase.
Then there’s the matter of the blade’s diameter. Ascertain that the diameter of the diameter fits tightly against the miter saw guard before cutting anything else.
Important: It is critical that you follow the manufacturer’s recommended diameter for safety reasons!
-
The total number of teeth
Another important element to consider while purchasing a miter saw blade is the tooth count.
Because some of the readings may be difficult to understand, the following is a synopsis of the material.
A miter saw blade with more teeth cuts more smoothly than one with fewer teeth.
The blade has at least 24 teeth, which is awesome for a ripping blade because this is the smallest number possible.
Resultantly, the tooth count of the miter saw blade varies depending on the job. Rips are ideal for cutting wood with the ripping blade.
When cutting through large amounts of wood, a lower tooth count makes the job easier.
Cross-cutting blades, on average, have between 60 and 80 teeth, depending on the manufacturer.
Cross-cutting blades are distinguished by the delicacy of their cuts, as opposed to ripping blades, which are more pronounced.
There are some additional considerations too
Despite the fact that the tooth count is critical, there are a plethora of other aspects to take into account.
Another factor to consider while choosing a miter saw blade is the design of the blade’s teeth.
While opinions disagree on the most efficient procedure for cutting teeth, TCG (Triple-Chip Grind) is commonly recommended as a viable substitute for many people.
The form of the TCG tooth is one of the factors that contribute to the greatest possible cut.
This design is appropriate for dealing with aluminum and wood materials,. Other typical tooth models are as follows:
When it’s about ripping blades, a flat-top grind is the best choice for rapid and effective cutting.
Top bevel rotation – Ensures a smooth cut without pieces or splinters by rotating the blade at the top.
Using an alternating top and bottom surface bevel, you will get cleaner cuts and a pointier edge, which is very beneficial when working on hard materials.
Top bevels with alternating sharp and high angles on the top and bottom
The teeth on the edge of a miter saw blade provide the cutting action. When it comes to the tooth count, it varies with a variety of variables.
Consequently, you must select whether to use the miter saw to crosscut or rip the material.
Rips (cutting wood perpendicular to the grain) require a blade with fewer teeth than crosscuts (cutting wood parallel to the grain) (chopping wood across the grain).
There are several types of cutting to choose from, and you may choose both cross and rip cutting.
The best option is a mix of the two options. They have a greater number of teeth than a ripping blade, thus they can shred through anything.
While they are less common than the crosscutting kinds, they can perform both tasks since they are more numerous.
When Deciding Amongst Miter Saw Blades With 60 Or 80 Teeth, Consider The Following Factors:
Clearance On One Side
When comparing blades with 60 and 80 teeth, the amount of side clearance is very different.
The space between the teeth of a blade is called side clearance, and it has an impact on how well a saw cuts through any material as well as how much pressure is required when the saw works.
While using, wood will pass through it and the depth of the gap will vary based on the type of wood; 60 measures around 0.08 inches wide, while 80 measures approximately 0.13 inches deep.
When planning your project, know which materials you’ll be cutting with your miter saw blade to choose which one to use: hard or softwood.
Despite the fact that hardwoods need greater effort than softer ones, 60 tooth blades are more than enough for these applications because blades rarely face failure in these materials.
Softwood is fragile and will your blade will break if it is not cut with the appropriate technique.
Because they can cut through both hardwoods and softwoods, 80 teeth are more suitable for this material than other types of teeth.
Both blades are suitable for simple tasks or finer cuts that do not require a lot of effort, however, blades with 80 teeth are more common.
The wider form provides greater control over the depth to which each tooth is driven into the wood and also prevents breakage due to excessive strain on one side of the tooth.
Gullet
Gullets are the gaps between the teeth that are there to remove shavings and other debris from between the teeth.
A 60-tooth blade has smaller gullets and needs much more effort to operate, but its wide spaces make it excellent for softer woods because of the larger spacing between the teeth.
It takes less effort from you to produce the same deep cuts with an 80-tooth blade as it does with a blade with 60 teeth since the spaces between the teeth are larger.
This technique also helps cut harder wood kinds by increasing the number of teeth on the blade surfaces, which makes them less prone to shattering when under high strain.
Compared to hardwoods like oak and maple, and softwoods such as pine and balsa, these blades have been found to outperform both types of wood. It is also more suited for cutting thin sheets of material than any other blade.
When cutting through heavy woods like oak or maple, the 80-tooth blade takes less pressure, but when cutting through lighter woods like as pine or balsa, the blade needs more effort.
When cutting softwood, the gap between the teeth of this kind of saw creates lots of dust, which is not good for the saw.
Miter saw blades with 60 teeth are amazing for cutting boards that do not require more pressure to be applied. Moreover, they perform admirably with harder woods.”
Hook Angle
When a blade makes contact with the wood, it generates a hook angle that can be seen on the blade. The greater the distance between two successive teeth from the horizontal, the more difficult it will be to cut the material cleanly and precisely.
To achieve the greatest results, blades with an upper rake of five to ten degrees should be used.
Designed specially to help with the reduction of noise and vibration, anti-vibration slots can be found in many different devices.
This is significant because the louder the saw, the more likely it is that you will be able to hear it through your ears.
When choosing a miter saw blade, it is important to consider not just the number of teeth but also the anti-vibration slots.
FAQs
What are the different types of miter saw blades?
There are many different types of miter saw blades available, each designed for a specific purpose. Some of the most common types include:
General-purpose blades: These blades are a good all-around choice for cutting a variety of materials, including wood, plywood, and MDF.
Crosscut blades: These blades have a higher tooth count than general-purpose blades and are designed to make smooth, precise cuts across the grain of wood.
Rip blades: These blades have a lower tooth count than crosscut blades and are designed to make fast, aggressive cuts with the grain of wood.
Dado blades: These blades are used to cut dadoes, which are channels that are cut in wood to accept other pieces of wood.
Plunge blades: These blades are designed for plunge cuts, which are cuts that are made into the workpiece from above.
Metal-cutting blades: These blades are designed to cut through metal.